This application is one of the easiest ways to create above ground liquid containment on the market and allows you to quickly create a reservoir designed to suite your needs. Whether it is for dirty water, clean water, or environmental containment, this is a quick and easily movable option.


The NOAQ Boxpool is a temporary basin for storing liquids of different kinds. Clean water, contaminated water, firewater, dredged material etc. It can also be used for temporarily storage of dry matter like sawdust, wood chips and pellets.
A NOAQ Boxpool is assembled by the same components as the NOAQ Boxwall, our mobile flood barrier, which means the same device can be used for two quite different purposes.


Download NOAQ Tubewall Specification from below


The individual ”boxes” are easily snapped together, and by letting the barrier form a closed figure a basin is created. The basin is then covered by a liner. The components are small enough to be transported in a normal car.
There are two different boxes; straight ones and corners. The corner boxes are 30°, which means 12 pieces can be used to build a circular boxpool, containing a little more than 1 m3. By cutting the circle in two, and inserting 26 straight boxes, an elongated boxpool of some 8 m3 is created, and by adding further 38 boxes you get a boxpool containing no less than 38 m3. Deployed on a road it is still narrow enough to allow one lane to be kept open for traffic. Other desired dimensions are possible due to the flexible construction of the device.



Configuration BP50-1 BP50-8 BP50-38
Height 50cm 50cm″ 50cm″
Length x Width 2 x 2m 10 x 2m 24 x 4m
Volume 1^m3 1^m3 1^m3
Corner+Straight Boxes 12+0 12+26 12+64
Total Weight (Boxes + Liner) 32kg 32kg 32kg
Material Boxes ABS ABS ABS
Material Liner PE 0, 18 mm PE 0, 18 mm PE 0, 18 mm


Here are some examples of the products in action!